Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor Cooling/Heating
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size?75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
Output: 2 Relays
Temperature Measuring Range: -50?210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF?-50 oF -160 oF?/ ±1 oC?-50 oC -70 oC?
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
; Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
1x ITC-1000 Temperature controller 110v with 6.67 NTC Sensor
1. How to wire? Q: I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals.
A: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit.
2. Q: The cooling device doesn't work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing.
A: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.
Fahrenheit and Celsius Display Can Be Choose
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Temperature Calibrating, Refrigerating control output delay protection