Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500-Pack from Kreg

Price: $26.99 $18.36
Product prices and availability are accurate as of 2017-03-27 11:31:38 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $8.63 (32%)
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

We are delighted to offer the fantastic Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500-Pack.

With so many on offer today, it is wise to have a make you can recognise. The Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500-Pack is certainly that and will be a superb purchase.

For this price, the Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500-Pack is highly recommended and is always a popular choice for many people. Kreg have provided some great touches and this results in good value.

Manufacturer Description

Kreg 1-Inch #8 Coarse Washer Head Screws work well in 1/2-inch thick, softer material. The washer head of this screw is a very popular head style, as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its own hole, eliminating the need to pre-drill in even the hardest materials. Kreg screws also have larger diameter steel shanks for an impressively strong screw that is almost impossible to break. These screws have a bronze-colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.

Kreg 1-Inch #8 Coarse Washer Head Screws work well in 1/2-inch thick, softer material. The washer head of this screw is a very popular head style, as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its own hole, eliminating the need to pre-drill in even the hardest materials. Kreg screws also have larger diameter steel shanks for an impressively strong screw that is almost impossible to break. These screws have a bronze-colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.

Product Features

500 coarse washer head screws with wide bearing head surface Washer head seats flush in the bottom of the pocket, eliminating pull through Larger threads provide maximum holding power Great for softer materials like pine, plywood, particle board, MDF and melamine 1-inch screw for joining 1/2-inch stock

Write a Review