TEN-HIGH® AC110V glass laser tube 40W CO2 700mm length, 50mm Dia for laser engraving and cutting machine from TEN-HIGH

Price: $223.00
Product prices and availability are accurate as of 2017-03-21 20:10:21 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Westcoast Tools are delighted to stock the excellent TEN-HIGH® AC110V glass laser tube 40W CO2 700mm length, 50mm Dia for laser engraving and cutting machine.

With so many available right now, it is good to have a name you can recognise. The TEN-HIGH® AC110V glass laser tube 40W CO2 700mm length, 50mm Dia for laser engraving and cutting machine is certainly that and will be a perfect purchase.

For this reduced price, the TEN-HIGH® AC110V glass laser tube 40W CO2 700mm length, 50mm Dia for laser engraving and cutting machine comes widely respected and is a popular choice amongst lots of people. TEN-HIGH have included some nice touches and this equals good value for money.

Manufacturer Description

Introduction
Model:CO2-TUBE-40W-70CM
Output Power:40W
Wavelength:10600nm
Working Voltage:15KV (Trigging Voltage=22KV)
Working Current:18mA
Divergence:1.95(beam diameter)
Dimensions:Length 700mm
Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
Maximum output voltage:DC25KV (40W;50W) / DC28KV (60W) / DC35KV (80W)
Maximum output current: DC20mA (40W;50W)/ DC23mA (60W) / DC28mA (80W)
Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
Response time (from time of input being available to the output current being up to nominal value)<1ms
TTL voltage level control: effective voltage level can be high or low through setting.
Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
Environmental requirements: temperature (-10 to 40centidegree), relative humidity<85%.

Product Features

Isolation Withstand voltage,Response time<1ms Protection: with well-grounded enclosure, output circuit of power supply can be open for short time TTL voltage level control: effective voltage level can be high or low through setting Protection switch: for detection of cooling water, to protect laser device Laser power adjustment:adjusting the output current of power supply through resistor/PWM control

Write a Review