TEN-HIGH AC110V glass laser tube 60W CO2 1000mm length, 50mm Dia for laser engraving and cutting machine from TEN-HIGH

Price: $525.00
Product prices and availability are accurate as of 2017-03-13 07:21:56 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Westcoast Tools are delighted to stock the famous TEN-HIGH AC110V glass laser tube 60W CO2 1000mm length, 50mm Dia for laser engraving and cutting machine.

With so many available right now, it is good to have a brand you can recognise. The TEN-HIGH AC110V glass laser tube 60W CO2 1000mm length, 50mm Dia for laser engraving and cutting machine is certainly that and will be a great acquisition.

For this price, the TEN-HIGH AC110V glass laser tube 60W CO2 1000mm length, 50mm Dia for laser engraving and cutting machine is highly recommended and is always a regular choice for lots of people. TEN-HIGH have included some great touches and this equals good value.

Manufacturer Description

Notice:
1.Here is the laser engraver with this laser tube for your reference:
https://www.amazon.com/dp/B01D2PPA2C
2.To purchase a laser tube,please confirm your machine's installation space,like the diameter and length,all should be a little bigger than laser tube's size
Introduction
Model:CO2-TUBE-60W-1000MM
Output Power:60W
Dimensions:Length 1000mm
Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
Response time (from time of input being available to the output current being up to nominal value)<1ms
TTL voltage level control: effective voltage level can be high or low through setting.
Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
Environmental requirements: temperature (-10 to 40 centidegree), relative humidity<85%.

Product Features

Isolation Withstand voltage,Response time<1ms Protection: with well-grounded enclosure, output circuit of power supply can be open for short time TTL voltage level control: effective voltage level can be high or low through setting Protection switch: for detection of cooling water, to protect laser device Laser power adjustment:adjusting the output current of power supply through resistor/PWM control

Write a Review